The real Heat Pump in action Cooling Mode (regular Air Conditioning)

Hold on a minute- Does that mean a regular air conditioner is considered to be a heat pump?

Well let’s see:

1. Heat is generated inside your house- from sun shining through windows and onto the roof and walls, from appliances and from your body. This is the equivalent of the flame heating the water in our first example.
2. Your air conditioner transfers that heat from inside your house to outside your house. This is the equivalent of the pump and radiator

So in theory- yes, any regular air conditioner can be considered to be a heat pump (but don’t tell this to your repair man or you will confuse him!)

So what is different between your regular air conditioner and a heat pump?
Before we discuss the difference let’s see how the heat pump acts in Cooling Mode:


Before we start notice three things:
1. The position of the Reversing Valve
2. The Direction of the flow of the refrigerant.
3. The inlet and outlet ports of the Compressor (those will never change) Did you notice?

OK- Let’s continue and we’ll start at Point 1 on the diagram
• Point 1 At the beginning of the cycle the refrigerant (such as Freon) is in a liquid form (gas contained under pressure becomes a liquid just like the propane in the tank that you use to BBQ that juicy steak). This liquid refrigerant is very cold. It enters the evaporator coil located inside your house. The hot air in your house moves over the coil and the air starts to lose its heat and cool down.
• Point 2 After the refrigerant leaves the indoor evaporator coil it has absorbed heat and become gas. Just like when you heat water on the stove and it becomes steam the refrigerant gas evaporated when it absorbed all that heat in the house (that’s why we call this coil the evaporator) The refrigerant enters the compressor which mechanically pressurizes the gas. That process will increase its temperature so the refrigerant will leave the compressor as hot gas.
• Point 3 The refrigerant next moves to the condenser coil located outside the house. Because the temperature outside is lower than the temperature of the hot gas the heat is transferred or “rejected” from the refrigerant in the coil to the outside air. As the temperature of the refrigerant gas cools it will form liquid condensate- just like the water droplets that form on a cold glass of soda (that’s why we call this coil the condenser).
• Point 4 The refrigerant leaves the outdoor condenser coil as warm liquid. Now we need to make the warm liquid refrigerant cold so that it can absorb more heat. So it goes to the metering device which drops the pressure on the warm liquid and thus drops its temperature. The refrigerant leaves the metering device as a cold liquid, ready to repeat the cycle again.

Well that wasn't too bad was it? Did you understand it or you need to go over it one more time?

For a fun (and safe!) experiment, put your hand to feel the air that is blowing out of your Condenser Unit (that big ugly box sitting in your back yard or over the roof). In the summer time you will feel hot air is coming out- that is the heat from inside the house! If you don’t feel hot air coming out, that means either your Compressor is not working or you are out of refrigerant and your air conditioner needs to be recharged with more refrigerant.

Now what about heating- how does that work?
Well let’s look at the next diagram:

Did you notice what just happens?
Here are the two diagrams, side by side. Look carefully this time:


Look at the reversing valve it Rotates 90o , that changes the direction of the flow of the refrigerant (Freon). It goes in the opposite direction and this is the reverse of the cooling cycle. Instead of absorbing heat from inside the house it absorbs heat from the air outside the house and “rejects” (or transfers) that heat to the indoor air. Now the indoor coil has become Condenser and the outdoor coil has become Evaporator
Notice that the heat isn’t generated by an oil burner or a gas furnace. It is just moved (or pumped) from the outside air to inside the house. This is why the Heat Pump is so popular in moderate climates. You don’t need to have a furnace or get oil or gas delivered when the weather cools off. Because of the reversing valve you can use the same electric system as both an air conditioner and a heater!
For a fun (and safe!) experiment, try this. Take a regular window unit that you buy at any department store. Install it facing the other direction so the control panel is facing outside. Even though it is an air conditioner you will get hot air in your house. The air conditioner is actually a heater when it is reversed- this is the function and effect of the reversing valve. It changes the direction of the refrigerant and can make an air conditioner a heater or a heat Pump

Let’s summarize things up:
• Heat pump (or air conditioners) don’t generate heat. The heat already exists inside your home.
• it is exactly like an air conditioner- it moves the heat from one place to anther.
• The only different is that in heat pump we have a Reversing Valve that allows us to chose to move the heat from inside the house to the outdoors (cooling mode) or to reverse the cycle and remove the heat from outside the house to the indoors (heating mode).
• Air conditioners don’t have a Reversing Valve so they can only move the heat from inside the house to the outdoors (cooling mode only).
•One more thing the heat pump thermostat is completely different than a regular air conditioner thermostat. So make sure that you are using
the right one (we will cover that topic later).